Home Custom Soap Boxes Gemstone Soap Packaging
Gemstone soap gift boxes with a gem seated in a cradle
Gemstone soap gift boxes with a gem seated in a cradle
Gemstone soap boxes wholesale stacked in a printed run
Crystal soap packaging holding a set of colored gems
Gemstone soap packaging for a single wrapped favor gem

Gemstone Soap Packaging

Gemstone soap packaging has to protect the points because a faceted gem touches the box walls only at its tips. One drop in a flat bottom carton chips a facet off an amethyst or quartz gem, and a chipped point cannot be polished back.

We seat each gem in a die cut foam or card cradle shaped to it with a cavity 2 mm larger than the gem. These gemstone soap boxes use 300 to 350 GSM SBS with a window or a clear lid so the crystal stays on show.

The Customized Boxes is a direct packaging manufacturer in Neptune, New Jersey with production in house. We draw a dieline around your largest gem and send a plain sample so you can test the cradle before the print run. Shipping is free across the US and the minimum is 100 boxes per size and design.

Get Custom Quote


  • Custom Sizes Built around your product
  • MOQ 100 Boxes Per size, per style
  • Free Design Support Every file checked
  • No Setup Charges No die or plate fees
  • 8 to 10 Day Turnaround After dieline approval
  • Free US Shipping Across the US

What Is Gemstone Soap and Why Does It Chip in a Box?

Gemstone soap is a clear melt and pour glycerin soap cut and faceted to look like amethyst, quartz or rose crystal. A rectangle bar rests on a flat face, but a faceted gem rests only on a few small points that break first in transit.

A cradle cut to the shape of the gem spreads that load across its sides, so the cavity size comes next.

What Size Insert and Box Fit Gemstone Soap Boxes?

A medium 4 oz gem fits a 72 x 57 x 47 mm cavity inside a box of 88 x 73 x 55 mm.

Insert cavity and inside box size for gemstone soap, cavity at gem plus 2 mm with 8 mm walls and base
Gem size Gem dimensions Insert cavity Inside box size
Small 2 oz About 50 x 40 x 35 mm 52 x 42 x 37 mm 68 x 58 x 45 mm
Medium 4 oz About 70 x 55 x 45 mm 72 x 57 x 47 mm 88 x 73 x 55 mm
Large 6 oz About 85 x 65 x 55 mm 87 x 67 x 57 mm 103 x 83 x 65 mm

Each cavity runs 2 mm over the gem on every dimension with an 8 mm insert wall on each side and an 8 mm base. Measure your largest gem because hand cut facets vary. A snug cavity stops chipping, but a glycerin gem still needs protection from humid air.

Why Does Glycerin Gemstone Soap Need Shrink Wrap or a Film Sleeve?

Glycerin gemstone soap needs shrink wrap or a film sleeve because melt and pour bases hold more glycerin than cold process soap. That glycerin pulls water from humid air and beads on the facets as glycerin dew that dulls the clear surface.

A cold process bar is the opposite because it cures for 4 to 6 weeks and needs vents or an open window to breathe. A melt and pour gem does not cure, so a tight film is the normal and correct wrap here. Once the gem is sealed the box can show it off.

How Do Gemstone Soap Gift Boxes Show the Crystal?

Gemstone soap gift boxes show the crystal through a die cut window in 150 to 250 micron PET or through a full clear lid. Keep any window at least 6 mm from a fold, and our soap boxes with window page covers aperture shapes.

Single gems in a small window box suit wedding and party favors. Sets of three or five gems sit in one cradle with 8 mm walls between them. Our soap gift packaging page covers rigid set boxes for this kind of crystal soap packaging. With the box chosen the order takes one short form.

How Do You Order Gemstone Soap Packaging Wholesale?

Send your gem size and the number of gems in each box and the quantity through our quote form and we return a dieline and a price. Pricing runs from $0.50 to $3.50 per box depending on size, board and quantity.

  • Minimum order is 100 boxes per size and design and it comes down on rigid, corrugated and larger sizes
  • Price breaks arrive at 500 and 1,000 units on one artwork and not across mixed designs
  • Production takes 8 to 10 business days for folding carton and 10 to 12 for rigid and wrapped
  • A plain sample takes 3 to 5 business days and a printed one takes 7 to 10
  • No setup or tooling fees apply because the die and the plates sit inside your unit price
  • Shipping is free across the United States on every order we take

Seat your largest gem in a plain sample before the print run, and find every bar style we make on our custom soap boxes page.

Specifications for gemstone soap packaging
Specification Options
Gem sizes Small 2 oz, medium 4 oz and large 6 oz, any size to order
Insert cavity Gem plus 2 mm on every dimension, shaped to the facets
Insert Die cut foam or card cradle with 8 mm walls and base
Board SBS 300 to 350 GSM at 14 to 18 pt, or rigid greyboard for sets
Window 150 to 250 micron PET window or full clear lid, 6 mm from folds
Wrap Shrink wrap or film sleeve on each glycerin gem
Set sizes Single gem favors, sets of three or five gems
Print and finish Offset CMYK or Pantone, hot foil, spot UV, matte or gloss lamination
Minimum order 100 boxes per size and design
Price breaks 500 and 1,000 units on one artwork
Setup and tooling None, on the first order or any reorder
Production 8 to 10 business days after dieline approval, 10 to 12 rigid
Samples Plain 3 to 5 business days, printed 7 to 10
Artwork Vector PDF or AI on our dieline, 3 mm bleed, Pantone identified
Estimated price range $0.50 to $3.50 per box for a printed folding carton, rigid quoted separately
Shipping Free across the US. Export orders quoted separately

How To Order Custom Boxes

Four steps from your first message to boxes on your dock. There are no setup or tooling fees at any stage, and delivery is free across the US.

  1. Tell Us About Your Product

    Send your product size, the packed weight and the quantity you need. We recommend the board grade and box style that fit, then quote a unit price with no setup fee.

  2. Approve Your Dieline

    Upload artwork as a vector PDF or AI file and we check it against our artwork guidelines for bleed, resolution and Pantone colors. If you have no artwork yet, our team draws it on our dieline for you.

  3. Check a Real Sample

    A plain structural sample takes 3 to 5 business days and a printed sample takes 7 to 10. You hold the actual box before the full run starts.

  4. Production and Free Delivery

    Production runs 8 to 10 business days after you approve the dieline. We pack your boxes and deliver them free across the US, with export orders quoted separately.

Start Your Quote

Our minimum order is 100 boxes per size and design, and it comes down on rigid, corrugated and larger sizes. Price breaks at 500 and 1,000 units.
Or build your own dieline first on our free dieline generator.

Build Your Dieline Free, Before You Order

Most suppliers send a dieline after you place an order. Ours is a live tool on this site. Pick a box style, type your own dimensions and download the file in a few seconds, with no account and no charge.

The Customized Boxes Download
Reverse Tuck End
reverse tuck · dust flaps Unit
mm cm in
Size
120120–200 6030–60 160100–550
Material Cardstock SBS (White) Generate
Details Ready to download. inside119.4 × 59.4 × 158.9 mm outside120.4 × 60.4 × 160.9 mm sheet375.5 × 309 mm boardSBS · 0.5 mm
CutCreaseBleed
Reverse tuck end dieline, 120 x 60 x 160 mm, from our generatorRed lines are cut, blue dashed lines are crease and the green outline is the bleed edge.
Sheet 375.5 × 309 mm Die 120 × 60 × 160 mm

Open the Dieline Generator

Every box style we make is in the tool, at any size you type. Exports to AI, PDF and SVG, and our design team checks your artwork on that dieline free of charge.

Gemstone soap box questions buyers ask before ordering

Send us your largest gem size if your question is not answered below.

What is the minimum order for gemstone soap boxes?

The minimum is 100 boxes per size and per design, because each cradle size runs on its own die. It comes down on rigid, corrugated and larger sizes.

How do you stop gemstone soap from chipping in shipping?

We seat each gem in a die cut foam or card cradle shaped to it with a cavity 2 mm over the gem. The cradle holds the gem by its sides so the points never touch the box walls.

Should gemstone soap be shrink wrapped before boxing?

Yes. Melt and pour glycerin soap pulls water from humid air and sweats, so a shrink wrap or film sleeve keeps the facets clear. A cold process bar is different and needs air to finish curing.

Can gemstone soap gift boxes hold a set of gems?

Yes. We cut one cradle with a cavity for each gem and 8 mm walls between them. Sets of three or five gems sit under a clear lid or a window.

Free of charge

Hold the Box Before You Commit

A quote is easy to compare on a screen. A sample is the only thing that tells you how the board feels in the hand and whether your product sits the way you expect. We send samples free, and you can pick the one that answers your question.

  • Plain Sample Unprinted, so you can judge the structure, the board and the fit around your product. 3 to 5 business days
  • Random Sample A box from recent production, so you can see our print quality and finishes in the hand. Ships from stock
  • Printed Pre-Production Sample Your own artwork on your own board, exactly as the run will be printed. 7 to 10 business days

Order a Sample Box

A flat view and a 3D mock-up come free before anything prints. Already know what you need? Get a quote instead.